Mace MAS-WA-SYS Guia do Utilizador descarregar pdf (Página 14)

a. enterinG alert mOde

• On the Keychain Remote: Press to activate.

• On the Wireless Alarm Panel: First make sure the panel is in STAN DBY mode, and then enter into

ALERT mode by taking the following steps:

Keys Description Note

(1234 or

4-digit PIN) +

You must be in STANDBY

mode before turning to

ALERT mode

*To make sure you are in STANDBY mode:

- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN

- Press

- The panel will display the below image while you are in

STANDBY mode:

(One beep indicates that you entered a valid PIN, three beeps

indicate that an invalid operation was performed).

(1234 or

4-digit PIN) +

Enter 4-digit PIN, press

and for ALERT mode

- The system will then enter ALERT mode

- If the Zone is enabled, a number will appear as displayed in

the image below:

B. exitinG alert mOde

• On the Wireless Alarm Panel: Enter your 4-digit PIN followed by to exit ALERT mode.

• On the Keychain Remote Control: Press

to exit ALERT mode.

c. ZOne SettinGS

Programming each zone in ALERT mode:

Keys Description Note

(1234 or

4-digit PIN) +

You must be in STANDBY

mode before turning to

ALERT mode

*To make sure you are in STANDBY mode:

- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN

- Press

- The panel displays the below image while in STANDBY mode:

(One beep indicates that you entered a valid PIN, three beeps

indicate that an invalid operation was performed).

4-digit PIN +

Enter 4-digit PIN for setting

followed by

The panel will display the below image:

(One beep indicates that you entered a valid PIN, three beeps

indicate that an invalid operation was performed).

Press

then to set the

ALERT Mode

Toggle 1, 2, 3, 4, 5, 6, 7, 8 to turn each zone ON or OFF

- If no number appears, the zone is turned OFF.

The panel will display the below image:

Press to complete the

setting

Conﬁrm the setting and return the panel to STANDBY

by pressing

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários

Mace MAS-WA-SYS Guia do Utilizador Página 14

Comentários a estes Manuais