Mace MAS-WA-SYS Guia do Utilizador descarregar pdf (Página 10)

a. adjuStinG exit delay

The default setting of the Wireless Alarm Panel allows the user 20 seconds to exit the property before

the alarm is ARMED. However, this Exit Delay can be adjusted to between 10 — 60 seconds as follows:

Keys Description Note

(1234 or 4-digit

PIN) +

You must be in STANDBY

mode before adjusting the

Exit Delay

*To make sure you are in STANDBY mode:

- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN

- Press

- The panel will display the image below when you are in

STANDBY mode:

(One beep indicates that you entered a valid PIN, three

beeps indicate that an invalid operation was performed).

(1234 or 4-digit

PIN) +

Enter the default PIN “ 1–2–3–

4” OR your new 4-digit PIN

for setting followed by

The panel will display the below image:

Press then

(as many times as required)

to set the new Exit Delay

• When

is pressed the ﬁrst time the panel ﬂashes with

the number of seconds currently set for the Exit Delay

(The factory default setting is 20 seconds)

• Each time

is pressed the Exit Delay is increased by a

further 10 seconds between the adjustable range of 10 to

60 seconds

• The Exit Delay time on the LCD display will ﬂash until the

setting is completed

Press to complete the

setting

Conﬁrm the setting and return the panel to STANDBY by

pressing

B. adjuStinG entry delay

The default setting of the Wireless Alarm Panel allows the user 30 seconds to enter the property and

DISARM the alarm before it is triggered. However, this Entry Delay can be adjusted to between 10—60

seconds as follows:

Keys Description Note

(1234 or 4-digit

PIN) +

You must be in STANDBY

mode before adjusting the

Entry Delay

*To make sure you are in STANDBY mode:

- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN

- Press

- The panel will display the image below when you are in

STANDBY mode:

(One beep indicates that you entered a valid PIN, three

beeps indicate that an invalid operation was performed).

(1234 or 4-digit

PIN) +

Enter the default PIN “ 1–2–3–

4” OR your new 4-digit PIN for

setting followed by

The panel will display the below image:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentários a estes Manuais

Sem comentários

Mace MAS-WA-SYS Guia do Utilizador Página 10

Comentários a estes Manuais